PHxIN

Rail bonds are set in place using a specific hydraulic tool that is used to fix the bond in the rail by expanding the bushing.
Tool consisting of a calibrated manual hydraulic base and a pulling unit adapted to the thread of the bond to be set.
The tool and its pulling unit are identified by the same colour code. There is a colour for each setting force and the size of the bond to be set.
Easy to use : automatic release with an audible « click » when the setting force is reached.
Visual indication of the piston feed during crimping.
Removable handle, enabling a rail bond to be set in a restricted space (for instance, junction crossing).
A bushing remover (supplied with the tool) can be used to remove the reail bon if it has been damaged from externally.

The bonding connection system developped by Dubuis enables a mechanical and electrical connection to be made between a cable and the rail. This concept satisfies the increasingly stringent requirements of railway networks : reliability, result that is not operator-dependant, rail strength conserved. 

The bond is fitted with a hydraulic tool that, while holding the bushing in place in the rail, expands it by calibrated traction on the dowel.  In orange here, the contact surfaces and electrical connection surfaces. 

Scroll to Top