HYDRAULIC CRIMPING TOOL
WITH 14,4V OR 18V Ni-MH BATTERY *
FORCE
130 kN
STROKE
26 mm
BATTERY
14,4V 2,6Ah
ou 18V 3,0 Ah
DIMENSION
395x95x310
WEIGHT
14,4V : 6,560 kg
18V : 6,760 kg
(with battery)
DEEP
INDENTING
16 to 240 sqmm
CRIMPING
10 to 300 sqmm
TIME OF
CRIMPING
12,5 sec.
   
H130 ELEC
Hydraulic tool on 14,4V or 18V battery particularly suitable for deep indenting underground lines (section 16 to 240 sqmm) as well as other general applications.
Ergonomic and stability for single one-hand operation.
Hydraulic double stage system for more speed.
Excellent weight/power ratio.

Head in accordance with HN-68-S-90 (EDF standard), rotating 180°.
Appart from the H130 deep indenting dies, all of the C130 dies may be adapted for use in this tool with an A12D1 adapter.
Maxi. Passage : 26 mm.
Electronical variator of speed in the trigger, enable the exact control of approach before crimping.
Automatic release with an audible "click" when the force of 130 kN is reached.
Return of piston by release trigger.
Two models are available :
* A tool operating on 14,4V 2,6Ah Ni-MH battery,
Crimping time : 12,5 seconds on terminals of 185 sqmm.
* or another version operating on 18V 3,0Ah Ni-MH battery for more efficiency.
Crimping time : 8,5 seconds on terminals of 185 sqmm.
Rechargeable battery without memory effect.
Light indicator :
- Control of the battery power load
- Confirmation of the good end of crimping
- Maintenance indicator every 15000 cycles.

Possibility of checking of the press-effort with a dynamometer or a manometer adaptable to the pressure control hole integrated in the tool.

Accessories :
Batteries, chargers and metal carrying cases (see data sheet for accessories of battery-operated hydraulic tools).


Interchangeable die sets which are common to H130, XH130 and H130Elec
Application
Copper or alu bare or insulated alu sleeves EDF
Adapter type A12D1
for using C130 dies
Type of crimp
Section
16 to 240 sqmm
Dies are not included in the reference of tools. Tools conform to the CE directive.