HYDRAULIC SETTING TOOL
FOR CRIMPING NUTS
FORCE
50 kN
STROKE
0 to 7 mm
DIMENSION
380x135x55
WEIGHT
2,660 kg
   
ES51
This hydraulic tool is particularly suitable for setting of crimping nuts from M6 to M16 (aluminium, steel or stainless steel, with flat head or countersunk head) for assembling and fixing of sheets.
This hydraulic tool is used with a draw stud, a counter nut and an anvil nose (please refer to below table).
Automatic release with an audible "click" when the pressure force of 50 kN is reached.
Return of piston by the release trigger.
The aluminium ring enables the stroke control (1 rotation = 1,5 mm) according thickness of the sheet and the type of crimping nuts.
Once crimping is carried out, unscrew the nut by knurled button, located at the end of the fixed handle.

As option :

Green metal carrying case.

Ptnb. 30172V		  

Mini and Maxi thickness of plates for nut crimping (in mm)
Flat head nuts
Countersunk nuts
M6
M8
M10
M12
M14
0,5 - 8
0,5 - 10,5
1 - 11
1 - 10
1,5 - 9
1,5 - 9
1,5 - 9
1,5 - 9
1,7 - 10,5
3 - 9


 
Type
Draw studs
ptnb
Counter nuts
ptnb
Anvil noses
ptnb
Ptnb for set
of 3 parts
M6
M8
M10
M12
M14
M16*
30174
30154
30153
30152
30151
30215
)
)
             ) 30146
)
)
)
30175
30150
30149
30148
30147
30214
30809
30810
30811
30812
30813
30829

(*) Possible only with Otalu (RIVKLE) range.


Control test gauge
supplied in a carrying case.

Ptnb. 30936

Draw studs, counter nuts and anvil noses are not included in the reference of the tool.