HYDRAULIC CRIMPING TOOL
WITH 14,4V OR 18V Ni-MH BATTERY *
FORCE
130 kN
STROKE
26 mm
BATTERY
14,4V 2,6Ah
ou 18V 3,0 Ah
DIMENSION
385x95x305
WEIGHT
14,4V : 6,840 kg
18V : 7,040 kg
(with battery)
HEXAGONAL
CRIMPING
10 to 300 sqmm
CRIMPING
TIME
12,5 sec.
   
C130-26 ELEC
Hydraulic tool on 14,4V or 18V battery for crimping connectors from 10 to 300 sqmm.
Ergonomic and stability for single one-hand operation.
Hydraulic double stage system for more speed.
Excellent weight/power ratio.

C-shaped head, rotating 320°.
Semi-circular dies common to all 130 kN tools.
Maximum passage : 26 mm.
Electronical variator of speed in the trigger, enable the exact control of approach before crimping.
Automatic release with an audible "click" when the force of 130 kN is reached.
Return of piston by release trigger.
Two models are available :
* A tool operating on 14,4V 2,6Ah Ni-MH battery,
Crimping time : 12,5 seconds on terminals of 185 sqmm.
* or another version operating on 18V 3,0Ah Ni-MH battery for more efficiency.
Crimping time : 8,5 seconds on terminals of 185 sqmm.
Rechargeable battery without memory effect.
Light indicator :
- Control of the battery power load
- Confirmation of the good end of cripming
- Maintenance indicator every 15000 cycles.

Possibility of checking of the effort with a dynamometer or a manometer adaptable to the pressure control hole integrated in the tool.

Accessories :
Batteries, chargers and metal carrying cases (see data sheet for accessories of battery-operated hydraulic tools).


Interchangeable die sets which are common to C130-26, XC130-26 and C130-26 Elec tools.

Application
Copper sleeves and lugs NFC 20.130
Copper or alu bare or insulated sleeves EDF
Copper or alu sleeves and lugs DIN 48083
C-shaped connectors
Pre-rounding
Copper sleeves and lugs NFC 20.130
Type of crimp
Section
10 to 300 sqmm
E54 to E280
KZ6 to KZ28
C10 to C70
50 to 240 sqmm
10 to 240 sqmm
Dies are not included in the reference of tools. Tools conform to the CE directive.